|
Posted by GSRS on August 21, 2006, 11:34 pm
Please log in for more thread options
Setting up a cichlid tank and added seachem cichlid lake salt.
I understand about adding more salt only as result of water changes. My
question is how do I verify whether I end up with too little or too much,
short of taking the sample to a store for them to stick it with a meter or
if I purchase a $70 meter (would rather not).
Is checking hardness GH enough? If out of range do i add more seachem?
Any help or links to info is appreciated.
Thanks,
Russ
|
|
Posted by on August 22, 2006, 4:44 am
Please log in for more thread options
wrote:
>Setting up a cichlid tank and added seachem cichlid lake salt.
>
>I understand about adding more salt only as result of water changes. My
>question is how do I verify whether I end up with too little or too much,
>short of taking the sample to a store for them to stick it with a meter or
>if I purchase a $70 meter (would rather not).
>
>Is checking hardness GH enough? If out of range do i add more seachem?
>
>Any help or links to info is appreciated.
>
>Thanks,
>Russ
>
Don't waste your money. Just use a good quality coral gravel and keep
the water clean and moving.
--
Steve Wolstenholme Neural Planner Software
EasyNN-plus. The easy way to build neural networks.
http://www.easynn.com
|
|
Posted by Richard on August 22, 2006, 6:52 pm
Please log in for more thread options
I have a 72 gallon Bow Front and a 75 gallon standard tank. Both have the
crushed coral for substrate, I have also pitched in a couple of limestone
rocks ( Texas Holey rock). My ph runs in the high 7's to the very low 8's.
My only problem is getting rid of all the babies that my fish keep
producing.
Richard
> Setting up a cichlid tank and added seachem cichlid lake salt.
>
> I understand about adding more salt only as result of water changes. My
> question is how do I verify whether I end up with too little or too much,
> short of taking the sample to a store for them to stick it with a meter or
> if I purchase a $70 meter (would rather not).
>
> Is checking hardness GH enough? If out of range do i add more seachem?
>
> Any help or links to info is appreciated.
>
> Thanks,
> Russ
>
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
Posted by Michael Emery on September 6, 2006, 9:39 pm
Please log in for more thread options
Russ,
I have a 55 and I don't do any of the cichlid salt issues, I put them in my
water (Which is very hard water) and they thrive, I have Yellow Labs, Red
Tops, and some Hongi's, a snail as they wanted escargot one day and ate the
other, and a Pleco. I would say that if you purchased your meter for $70
you're crazy. This is only my opinion. I have 60 Cichlids in my 55 gal
tank. Good Luck!
Mike
> Setting up a cichlid tank and added seachem cichlid lake salt.
>
> I understand about adding more salt only as result of water changes. My
> question is how do I verify whether I end up with too little or too much,
> short of taking the sample to a store for them to stick it with a meter or
> if I purchase a $70 meter (would rather not).
>
> Is checking hardness GH enough? If out of range do i add more seachem?
>
> Any help or links to info is appreciated.
>
> Thanks,
> Russ
>
|
|
Posted by dc on September 15, 2006, 11:23 am
Please log in for more thread options
> Is checking hardness GH enough? If out of range do i add more
> seachem?
Testing your carbonate hardness (KH) and general hardness (GH) is enough.
Tanganyika cichlids:
10 - 14 dKH
12 - 20 dGH
7.5 - 9 pH
Malawi cichlids:
9 - 12 dKH
12 - 19 dGH
7.5 - 8.5 pH
Those are ballpark figures. These fish are ridiculously resilient and will
usually be comfortable and display their full colours in almost any
condition.
The KH is usually more important to monitor than your GH as the KH is your
alkali buffer for maintaining a high pH.
Again, if you miss the mark it is unlikely to phase most species.
|
| Similar Threads | Posted | | Jack Dempsey (Fresh water or Salt water fish) | September 24, 2007, 3:26 pm |
| Cichlid ID Please | April 11, 2005, 6:04 am |
| Texas Cichlid having Pop Eye | January 24, 2008, 6:19 am |
| cichlid pop eye treatment | May 6, 2006, 10:41 pm |
| I have a sick cichlid................ | September 22, 2006, 1:47 pm |
| Any "new" cichlid hobbyists' here? | December 10, 2006, 4:35 pm |
| dried up cichlid | May 29, 2005, 9:34 pm |
| cichlid identification | July 7, 2005, 8:05 am |
| Need help to ID a Malawi cichlid | July 25, 2005, 1:07 pm |
| Anyone keeps Livingstonii's cichlid? | August 28, 2005, 7:18 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
>I understand about adding more salt only as result of water changes. My
>question is how do I verify whether I end up with too little or too much,
>short of taking the sample to a store for them to stick it with a meter or
>if I purchase a $70 meter (would rather not).
>
>Is checking hardness GH enough? If out of range do i add more seachem?
>
>Any help or links to info is appreciated.
>
>Thanks,
>Russ
>