|
Posted by Ray Martini on March 13, 2005, 10:45 am
Please log in for more thread options
I had to plumb the output of my Fluval 404 to a UV sterilizer. I needed a
few of the rubber hose fittings and some time and patience. I had two
leaking accidents and the wife was not a happy camper! 8=) After all was
said and done a few small dripping leaks appeared. A little plumbers goop
and teflon tape and it finally all came together. The key was the hose
fittings.
http://www.bigalsonline.com/catalog/product.xml?product_id=25197;category_id=2631;pcid1=1971;pcid2=
> Hi,
>
> I've been able to find just enough posts to know that this has been
> done, but not enough in the way of description: I want to route the
> return of a Fluval 304 through a SCWD. The problem is connecting the
> Fluval to the SCWD and making that connection sufficiently secure so
> that the backpressure created by the SCWD doesn't start a leak (SCWD is
> plumbed outside and below tank). any help?
>
> Thanks.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> I've been able to find just enough posts to know that this has been
> done, but not enough in the way of description: I want to route the
> return of a Fluval 304 through a SCWD. The problem is connecting the
> Fluval to the SCWD and making that connection sufficiently secure so
> that the backpressure created by the SCWD doesn't start a leak (SCWD is
> plumbed outside and below tank). any help?
>
> Thanks.